HP X1000 (DS829AV) manual Configuring a PC Card, Inserting a PC Card

Page 108

Hardware Options and Upgrades

Configuring a PC Card

ÄCAUTION: If you install all of the software or any of the enablers provided by a PC Card manufacturer, you may not be able to use other PC Cards. If you are instructed by the documentation included with your PC Card to install device drivers:

■Install only the device drivers for your operating system.

■Do not install other software, such as card services, socket services, or enablers, that may also be supplied by the PC Card manufacturer.

Inserting a PC Card

ÄCAUTION: To prevent damage to the PC Card connectors:

■Use minimal force when inserting a PC Card into a PC Card slot.

■Do not move or transport the notebook while a PC Card is inserted.

1.Hold the PC Card label-side up with the connectors facing the notebook.

2.Gently push the card into the slot until the card is seated.

Inserting a PC Card

8–4	Startup and Reference Guide—Part 2

Image 108

Contents Startup and Reference Guide Contents Part StartupSetting Up the Hardware Inserting a Battery Pack Opening the Notebook Connecting the Notebook to External Power Charging a New Battery Pack Turning On the Notebook Setting Up the Software Installing Basic SoftwareInstalling Optional Software Setting Regional and Display Preferences Turning Off the NotebookProtecting the Notebook from Power Surges Protecting the Notebook Against VirusesUsing the Notebook Safely Part Reference Startup and Reference Guide-Part Contents HardwareDisplay DisplayTop TouchPadTop TouchPad Keys and Antenna Top Keys and AntennaPower Controls Top Power ControlsLights Top LightsAudio Buttons and Speakers Top Audio Buttons and SpeakersFront Panel Front PanelConnectors and Jacks Rear Panel Connectors and JacksRear Panel Vent Rear Panel VentLeft Side Left SideRight Side Right SideUnderside Bays and Memory CompartmentUnderside Bays and Memory Compartment Docking Connector and Vents Underside Docking Connector and VentLabels Additional Standard Components Cables and CordAdditional Standard Components Cables and Cord Adapters and Battery Pack Additional Standard Components Adapters and Battery PackRestoration and Documentation CDs For Information About These Topics Select This GuideKeyboard TouchPad Identifying TouchPad ComponentsUsing the TouchPad Setting TouchPad PreferencesHotkeys Identifying HotkeysHotkey Procedures Hotkey Quick ReferenceHotkey Commands Switch Image Fn+F4Open Help and Support Window Fn+F1 Open Internet Explorer Fn+F3Initiate QuickLock Fn+F6 Decrease Brightness Fn+F7Increase Brightness Fn+F8 Play, Pause, or Resume an Audio CD or DVD Fn+F9Keypad Stop an Audio CD or DVD Fn+F10Play Previous Track of an Audio CD or DVD Fn+F11 Play Next Track of an Audio CD or DVD Fn+F12Switching the Functions of Keypad Keys Turning the Keypad On and OffKeyboard Power Identifying the Battery and Power/StandbyUnderstanding Standby, Hibernation and Shutdown StandbyHibernation Shutdown Choosing Standby, Hibernation or Shutdown Using Standby, Hibernation and Shutdown Procedures Identifying Power Controls and IndicatorsUsing Emergency Shutdown Procedures Turning the Notebook or Display On or OffTask Procedure Result Initiating or Resuming from StandbyInitiating or Restoring from Hibernation Setting Power Control Preferences Using Battery Power Identifying the Battery and Power/Standby LightsSwitching Between Battery and External Power Charging a Battery PackMonitoring the Charge in a Battery Pack Obtaining Accurate Charge InformationDisplaying Charge Information Managing Low-Battery Conditions Identifying Low-Battery ConditionsResolving Low-Battery Conditions Calibrating a Battery Pack When to CalibrateHow to Calibrate Charging the Battery PackPower Storing a Battery Pack Recharging the Battery PackBattery Conservation Settings and Procedures Replacing a Battery Pack Recycling or Disposing of a Used Battery Pack Power Drives and Drive Media Understanding Drive and Drive Media Terms Caring for Drives and Drive Media Using the IDE Drive Light Adding a Drive to the SystemInserting or Removing a Disc Inserting a DiscRemoving a Disc With Power Removing a Disc Without Power Displaying Media Contents Playing a DiscProtecting Playback Observing the Copyright WarningSetting the Boot Order Replacing the Internal Hard DriveRemoving the hard drive retaining screws Removing an internal hard drive from the hard drive bay Inserting an internal hard drive into the hard drive bay Replacing the hard drive retaining screw Multimedia Adjusting Volume Using the Internal Speakers Connecting an Audio DeviceIdentifying the audio jacks Connecting an S-Video Device Connecting the AudioConnecting the Video Turning a Video Device On and Off Changing the Color Television FormatUsing Multimedia Software Using Windows Media PlayerUsing WinDVD Playing a DVD or Video CDManaging DVD Region Settings Using Easy CD Creator Understanding Easy CD Creator FeaturesPreparing to Use Easy CD Creator Choosing Recording MediaResponding to the UDF Prompt Selecting Easy CD Creator Settings Formatting Recording MediaMultimedia Communications Modem Connecting the Modem Selecting ConnectorsConnecting a Modem to an RJ-11 Jack Connecting a Modem with an Adapter Using the Modem While Traveling Internationally Displaying the Current Country ConfigurationAdding a Country Configuration Solving Travel Connection Problems Check the Dialing ModeCheck the Line Check the Telephone Number Check the Dial ToneAccessing Communication Software Finding AT Command InformationNetwork Connecting the Network Cable Accessing the Network at Startup InfraredTurning a Network Connection Off and On Setting Up an Infrared Transmission Avoiding Standby While Using Infrared Hardware Options Upgrades Connecting a Powered Device Connecting a USB DeviceUsing a PC Card Selecting a PC CardConfiguring a PC Card Inserting a PC CardStopping and Removing a PC Card Using an SD Card or MMC Using the SD Card LightInserting an SD Card or MMC Removing an SD Card or MMC Disabling or Restarting an SD Card or MMCIncreasing Memory Displaying Memory InformationRemoving or Inserting a Memory Module Opening the memory compartment Removing a memory module Inserting a memory module Closing the memory compartment Connecting an Optional Cable Lock Connecting an optional cable lockHardware Options and Upgrades Software Updates, Restorations and Utilities Preparing for a Software Update Accessing Notebook Product InformationUpdating Software Accessing Notebook ROM Information Downloading and Installing an Update Downloading and Installing a ROM UpdateDownloading a ROM Update Installing a ROM Update Downloading and Installing a Non-ROM SoftPaq Setting a System Restore Point Restoring to a System Restore PointBacking Up and Restoring Data Repairing or Reinstalling Operating System Repairing the Operating SystemReinstalling the Operating System Reinstalling Device Drivers and Other Software Installing a Retail Version of an Operating System Using the Setup UtilityOpening the Setup Utility Navigating and Selecting in the Setup Utility Restoring Setup Utility Default SettingsExiting the Setup Utility Using the Support Utilities Using the Help and Support WindowUsing Support Telephone Numbers Obtaining Support Telephone NumbersPreparing to Call Technical Support Specifications Operating EnvironmentRated Input Power Input Power RatingFinding More Environmental Information Specifications Index CD-R vs. CD-RW 6-10 Compaq Support Software Index-3 Environmental specifications A-1 error message No Dial Tone Index-5 Advanced Users Only guide Maintenance, Shipping and Travel Index-7 Regulatory and Safety Notices Safety & Comfort Guide See also software VCR Index Index-12

Related manuals

Manual 8 pages 26.72 Kb