HP X1000 (DS829AV) manual Connecting a Modem to an RJ-11 Jack

Communications

Connecting a Modem to an RJ-11 Jack

To connect a modem to an analog telephone line that has an RJ-11 telephone jack:

1.Identify the RJ-11 1 jack on the notebook.

2.If your modem cable has noise suppression circuitry 2, which prevents interference with TV and radio reception, orient the circuitry end of the cable toward the notebook.

3.Plug the modem cable into the RJ-11 telephone jack (not the RJ-45 network jack) on the notebook 3.

4.Plug the other end of the modem cable into an RJ-11 telephone jack (not into an RJ-45 network jack or a PBX jack) 4.

Connecting a modem to an RJ-11 telephone wall jack (Telephone wall jacks vary in appearance by region and country.)

ÅWARNING: To reduce the risk of electric shock, disconnect the modem from the telephone network before accessing an internal compartment of the notebook. Internal compartments include the memory compartment and the battery and hard drive bays.

7–4 Startup and Reference Guide—Part 2