Paradyne COMSPHERE 3810 Plus and 3811 Plus

Paradyne COMSPHERE 3810 Plus and

3811 Plus

Configuring the 3810 Plus and 3811 Plus modems

1.Install the modem as described in the vendor’s documentation.

2.Attach a PC with terminal emulation software, as described in the vendor’s documentation.

3.From the terminal, enter the following AT command string:

AT&F&D2&S4\D3S2=128x7V2S7=60S85=1

4.Then enter the following command string:

ATY0S10=100S78=2M0E0\N1&W The modem is now configured.

Paradyne COMSPHERE 3910

You configure COMSPHERE 3910 modems using a front button panel (see Figure 20) or Hayes-compatible AT commands. For instructions on how to physically connect the modem and general configuration instructions, see the documentation that came with the modem. This document describes configuring the 3910 for particular, DEFINITY adjuncts.

Power On Selftst

Passed

F1 F2 F3

modf3150 KLC 030899

Figure 20. COMPSPHERE 3910 modem, front panel

555-233-116

Issue 4 October 2002 101

Page 101
Image 101
Avaya 555-233-116 manual Paradyne Comsphere 3810 Plus, Configuring the 3810 Plus and 3811 Plus modems