Avaya 555-233-116 Set Partner CO line port all platforms, Set incoming line ringing all platforms

DEFINITY INADS

7.Enter 2 to set the station port to analog rotary. Enter 1 if an analog DTMF telephone or PARTNER system telephone is connected.

8.Enter # to return to the start of the programming mode.

Set PARTNER CO line port (all platforms)

1.Enter # 2 0 1.

2.Press 1 for tone or 2 for pulse mode.

3.Enter # to return to the start of the programming mode.

Set automatic line selection — outgoing trunk (all platforms)

1.Press the right intercom (Central Tel Program) button.

2.Enter 1 5 (if INADS is connected to station 15) or enter the station number connected to the INADS port.

3.Enter * *.

4.Press the line 1 button (above left intercom). If the 2 lines are connected to the PARTNER for added reliability or security, press Next Procedure.

5.Enter * *.

6.Enter # to return to the start of the programming mode.

Set incoming line ringing (all platforms)

1.Press the right intercom (Central Tel Program) button.

2.Enter 1 5 (if INADS is connected to station 15) or enter the station number connected to the INADS port.

3.Press the line 1 button (above left intercom) until the LED changes to a steady green. This allows incoming calls to ring on line 1.

4.If AUDIX is installed, press the line 2 button until the LED changes to a steady green. This allows incoming calls to ring on line 2.

5.Enter # to return to the start of the programming mode.

6.Press Feature, followed by 0 0 to exit the programming mode.

DEFINITY ECS administration

By default, the INADS port automatically seizes an outgoing trunk on the PARTNER system. Therefore, a “9” is not required in the switch dial string.

186 Issue 4 October 2002 555-233-116