Set clock options

Cabling the Stratum 3 clock

Figure 38 shows typical connections to a Stratum 3 clock cabinet. Connections are made through the yellow field cross-connect. A custom Y-cable (H600-274) connects the CSU to the DS1 circuit pack and taps off the input for the Stratum 3 clock. A resistor built into the cable to provides the necessary isolation between the system and the clock. The Y-cable plugs directly into the CSU and connects to standard cables for interface to the system and the yellow field on the MDF.

The H600-307 cable connects the system end of the Y-cable to a DS1 circuit pack (shown as TN464F or TN767E). The B25A cable connects the clock end of the Y-cable to the yellow field on the MDF.

555-233-116

Issue 4 October 2002 165

Page 165
Image 165
Avaya 555-233-116 manual Cabling the Stratum 3 clock