Avaya 555-233-116 manual Configuring the ring indicator on 7400A DCE

Connect data modules

Configuring the ring indicator on 7400A DCE

The ring-indicator (pin 22) setting can have either of two values: CYCLE or ON (the default).

1.Accept the default values, unless otherwise instructed. When the SET RI LEAD? prompt appears, press the NEXT/NO button to keep the default, ON.

SET RI LEAD?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

Enabling remote loopback on 7400A DCE

The remote-loopback setting (pin 21) can have either of two values: ON or OFF (the default).

1.Accept the default values, unless otherwise instructed. When the SET RL LEAD? prompt appears, press the NEXT/NO button to keep the default, ON.

SET RL LEAD?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

Setting the signals-disconnect (SIGLS DISC) option on 7400A DCE

The settings can have either of two values: ON (the default) or OFF.

Accept the default values, unless otherwise instructed.

1.When the SET SIGLS DISC? prompt appears, press the NEXT/NO button to keep the default, ON.

SET SIGLS DISC?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

555-233-116 Issue 4 October 2002 67