Avaya 555-233-116 manual Definity INADS14, Analog loopback

DEFINITY INADS14

The DEFINITY® initialization and administration system (INADS) provides analog loopback connections and PARTNER connections for remote alarming and maintenance when direct connection to the public network is not possible.

NOTE:

These instructions are for Avaya Media Server or Gateway systems using the TN1648/B system access/maintenance (SYSAM) circuit pack. ISDN is required. These instructions do not apply to the S8300 or the S8700 Media Servers in a G700 Media Gateway configuration.

Analog loopback

Analog loopback connects the INADS port to an analog station port. It switches the call through the AUX connector on the processor carrier, across an analog line circuit pack, and out to the public network. Direct Inward Dialing (DID) is optional.

Installing INADS analog loopback on a standard-reliability system

1.Connect the INADS tip and ring port from the AUX connector to an analog station port through the MDF. See Figure 40. Use wire pair 50 and 25.

2.If you are using power fail transfer, connect the 808A2 transfer panel between the INADS connection to the station and the INADS connection to the loop-start trunk.

NOTE:

The 808A power fail transfer unit is not supported on the G700 Media Gateway.

555-233-116 Issue 4 October 2002 179