Avaya 555-233-116 manual CH = correctSetting?

Data modules and asynchronous data units

5.Press the NEXT/NO button until you see the CH = correctSetting? or CH - > correctSetting? prompt. Then press the ENTER/YES button.

CH = correctSetting?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ➜ ●

Push the button indicated by the arrow (➜ )

6.When the CONTINUE? prompt appears, press the ENTER/YES button.

7.When the SET CTS LEAD? prompt appears, press the ENTER/YES button.

SET CTS LEAD?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ➜ ●

Push the button indicated by the arrow (➜ )

8.Press the NEXT/NO button until you see the CTS = correctValue? or CTS ->correctValue? prompt. Then press the ENTER/YES button.

CTS ->correctValue?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ➜ ●

Push the button indicated by the arrow (➜ )

9.When the CONTINUE? prompt appears, press the ENTER/YES button.

10.When the SET DCD LEAD? prompt appears, press the ENTER/YES button.

SET DCD LEAD?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ➜ ●

Push the button indicated by the arrow (➜ )

88 Issue 4 October 2002 555-233-116