Avaya 555-233-116 manual Paradyne Comsphere, Configuring the 3715 for CMS

External modems

Paradyne COMSPHERE 3715

You configure COMSPHERE 3715 modems using the Hayes-compatible AT commands common to many modems. For instructions on how to physically connect the modem and enter the commands listed in the instructions below, see the documentation that came with the modem.

Configuring the 3715 for CMS

The instructions below set up the modem for use in a Call Management System (other configurations may work as well).

1.From the command line prompt of your terminal emulation software or terminal, enter at&f.

This loads factory default configuration options into active memory. If all is well, the modem replies OK.

2.Enter at%b9600.

This sets the data speed to 9600 kbps. If all is well, the modem replies OK.

3.Enter atq1&r0&S1\d1&w0.

This disables result codes, sets the RTS (Request To Send), DSR (Data Set Ready), CTS (Clear To Send) signals action to standard RS-232 operation, and saves the changes to profile 0. If all is well, the modem replies OK.

Configuring the 3715 for modem pooling

The instructions below set up the modem for use in a modem pool (other configurations may work as well).

1.From the command line prompt of your terminal emulation software or terminal, enter at &f.

This loads factory default configuration options into active memory. If all is well, the modem replies OK.

2.Enter at m0 x7 y0 &s1 /d1.

If all is well, the modem replies OK.

3.Enter at e0 v0 c2=128 s7=60 f10=100 &w0 &y0. If all is well, the modem replies OK.

100 Issue 4 October 2002 555-233-116