Avaya 555-233-116 manual Multimedia call handling Mmch, Connect the endpoints

Multimedia communications products: MMCX, MMCH,

ESM

				cydf048 PDH 091396
1.	To TN464F DS1/E1 circuit pack	4.	Bandwidth controller
2.	Part of main distribution frame (MDF)	5.	Remote port module
3.	H600-307 cable	6.	Wideband endpoint (wire per manufacturer)

Figure 60. Typical signaling wideband configuration with remote port module

1.For non-CSU installations, cross the transmit and receive lines so a transmit signal from the TN464F connects to the receive connection on the bandwidth controller and a transmit signal from the bandwidth controller connects to the receive connection on the TN464F.

2.For CSU installations, cross the transmit and receive lines between the CSU and the bandwidth controller.

Multimedia call handling (MMCH)

MMCH provides a single point to point conference call using voice, video, and data from one endpoint to another. The customer must have endpoints and a personal computer with H.320 desktop video installed.

Connect the endpoints

Use the following procedure and Figure 61 to connect the endpoints:

NOTE:

For a G700 Media Gateway configuration, the DCP telephones that are supported — item 1 in Figure 61 — are only 2 wire.

212 Issue 4 October 2002 555-233-116