Multimedia call handling (MMCH)

ProShare configuration

Table 26. Minimum system requirements

Version:

2.0 or higher

Minimum Processor Speed:

487/33 MHz, DX2/77

 

 

Disk Space:

7 MB

 

 

Memory:

12 MB RAM, 17 MB recommended

 

 

ISA Expansion Slots (17-bit):

2 slots

 

 

Monitor:

740x480, 257-color, VGA, SVGA

 

 

Operating System:

Windows3.1x or Windows95

 

 

The ProShare system must be set up so that it does not look for a Service Profile Identifier (SPID) when connecting to the Avaya Media Server. This is important because you administer the ProShare as a single 7500 data set and the telephone extension associated with that data set applies to both BRI channels.

1.Load the ProShare software onto the PC using the default values.

2.Enter the company name and serial number of the software.

3.Select the default directory location and install all files.

4.Answer NO to modem Setup.

5.Scroll through the list of countries and select the country in which the PC is installed.

6.At the Protocol and Switch Mfg window, click on Custom. Click on AT&T and click on Accept.

7.At the next window, choose PBX for Exchange Switch, and choose G3r (for Release 8r) or G3i (for Release 8si) (as appropriate) as the PBX type. Click on Accept.

8.Select yes or no for Phone Call Support.

9.A window with #Phone Numbers and #SPIDS appears. Set #Phone Numbers to 1 and set #SPIDS to 0.

10.Click on the Aliases button and enter the last 5 digits of the data extension number and an external alias.

11.Leave the telephone number at default and click on Accept.

12.Select restart windows.

555-233-116

Issue 4 October 2002 217

Page 217
Image 217
Avaya 555-233-116 manual ProShare configuration, Select restart windows