Paradyne COMSPHERE 3910

Disabling result codes

We have reached the options that we need to change. Proceed as follows.

1.From the ResultCodes (Enable) menu heading, press the right-arrow button once.

The Disable menu item appears.

2.Press F2 to select Disable.

3.Press F1 to select Nxt.

The ExtendResltCode (Enable) menu heading appears.

4.Press the right-arrow button once. The Disable menu item appears.

5.Press F2 to select Disable.

Exiting the DTE Dialer menu

Skip over the remaining menu headings. Proceed as follows.

1.Press F1 to select Nxt.

The ResultCode Form menu heading appears.

2.Press F1 to select Nxt.

The AT Cmnd Mode menu heading appears.

3.Press F1 to select End.

The Edit StrapGroup > menu heading appears.

Configuring the data line

Set the line speed and accept the default values for the other settings. Proceed as follows.

Opening the dial line menu

1.From the Edit StrapGroup > menu heading, press the right-arrow button twice.

The Dial_Line menu item appears.

2.Press F1 to select the Dial_Line menu heading. The Dial Line Rate menu heading appears.

Setting the line rate

1.From the Dial Line Rate menu heading, press the right-arrow button four times.

The 9600(V32b) menu item appears.

2.Press F2 to select 9600(V32b).

555-233-116

Issue 4 October 2002 107

Page 107
Image 107
Avaya 555-233-116 Disabling result codes, Exiting the DTE Dialer menu, Configuring the data line, Setting the line rate