Avaya 555-233-116 manual DCP extender, stand alone, Typical DCP extender connections

DCP extender, stand alone

Wire the circuit pack to the MDF with a 25-pair cable:

1.Wire to the data adapter per local standards.

2.Wire the data terminal and telephone as instructed in the document accompanying the data adapter.

DCP extender, stand alone

The stand alone extender installs at the work location. See Appendix A, Table 33, ‘‘DCP extender 25-pair cable pinout’’ for cabling information and pin assignments.

NOTE:

2-wire DCP extenders are not currently supported on G700 Media Gateway configurations.

Figure 8 shows a typical connection from a digital line 2-wire DCP circuit pack through two DCP extender devices. The DEFINITY Extender Switch Module System Administrator’s Guide contains additional information.

1.	Avaya™ Media Server/Gateway	7.	103A or modular wall jack
2.	TN2181 or TN2224B circuit pack	8.	Modular line cord
3.	25-pair cable	9.	DCP telephone (Such as 8410D,
4.	DCP extender		8405, or 8434)
5.	Main distribution frame (MDF)	10.	Remote work location
6.	Public switched telephone network (PSTN)

Figure 8. Typical DCP extender connections

555-233-116 Issue 4 October 2002 45