Avaya 555-233-116 manual Signaling configuration, Typical nonsignaling wideband configuration

Multimedia communications products: MMCX, MMCH,

ESM

1	3
	2

	4
POWER	AUX PORT COM PORT	MODEM	NETWORK
			DTE

6

5

	1			3		7		6
			2				9
						8
		cydf049 RPY 123097
1.	Wideband endpoint (wire per manufacturer)				6.	DS1/E1 circuit pack
2.	Modular cord				7.	Main distribution frame (MDF)
3.	103A or modular wall jack				8.	Distance limit depends on cable and
4.	Channel service unit (CSU)					endpoint type.
5.	H600-307 cable to DTE connector on CSU				9.	A25D 25-pair cable (male-to-male)

Figure 58. Typical nonsignaling wideband configuration

If using a CSU, the distance between connections may be up to 1300 ft.

(397.2 m). The maximum distance to the endpoint depends on the type of cable and the specifications of the endpoint.

Signaling configuration

A signaling connection from the system to a wideband endpoint passes through a bandwidth controller. The distance between the system and the bandwidth controller depends on the type of cable and controller. Figure 59 shows connections with and without a CSU.

210 Issue 4 October 2002 555-233-116