Avaya 555-233-116 manual Session Layer

Administering IP services

4.The Local Port field defaults to 0 for all client applications. You cannot make an entry in this field.

5.In the Remote Node field, enter the node name for the adjunct, as administered on the Node Names screen. For the call accounting application, type callacctg. Since the PMS application routes through the terminal server, termserver is the remote node for this service type.

6.In the Remote Port field, enter the TCP listen port assigned to the adjunct. The recommended value for CDR1 is 5101, and the recommended value for PMS is 5103.

NOTE:

This number must match the port administered on the end device. If you are using the Downloadable Reliable Session-Layer Protocol tool, this must match the port administered in the Server application. If you are using a terminal server, this number must match the Local Port number on the Port Setup menu. Consult the documentation for your Call Accounting system to determine the appropriate port for the CDR device.

7.Move to Page 3. Type y in the Reliable Protocol field for the CDR Service Type.

change ip-services						Page	3 of	3
		SESSION LAYER		TIMERS
Service	Reliable	Packet Resp	Session Connect		SPDU	Connectivity
Type	Protocol	Timer	Message	Cntr	Cntr		Timer
CDR1	y	3	1		1		1

8. Press ENTER to save your changes.

555-233-116 Issue 4 October 2002 133