Terminal server installation

Administering the gateway

NOTE:

If the C-LAN circuit pack and IOLAN+ are in the same subnet, skip this step.

1.Select Admin mode > Password and press ENTER.

2.Type iolan and press ENTER.

3.Select gateway to access the Gateway menu

4.Fill in the following fields for Entry 1:

Destination: C-LAN IP address

Gateway: Gateway address

Netmask: Subnet mask

NOTE:

The following steps re-initialize the IOLAN+ so it knows it’s connected to the LAN through your gateway.

5.Select reboot and press ENTER.

6.Press the space bar to restart the IOLAN+.

Administering an IOLAN+ port

Use this procedure when connecting an adjunct or serial COM port on a PC directly (locally) to the IOLAN+ (see Figure 23).

1.Select Admin mode > Password and press ENTER.

2.Type iolan and press ENTER.

3.Select port and press ENTER.

4.Type port number, where port number is the port that the adjunct connects to, and press ENTER to view the Port Setup Menu.

128 Issue 4 October 2002

555-233-116

Page 128
Image 128
Avaya 555-233-116 manual Administering the gateway, Administering an IOLAN+ port