Avaya 555-233-116 manual Creating an editable configuration set, Copying factory default settings

Paradyne COMSPHERE 3910

Creating an editable configuration set

It is generally easiest to configure the modem by starting from the default, factory configuration. You then change only those settings that are different for a DEFINITY installation.

Copying factory default settings

Make a copy of the default, factory configuration using the following procedure.

1.On the front panel of the COMSPHERE 3910, press the F2 button to select Configure.

The Ld EditArea frm > prompt appears.

2.Press the right-arrow button four times. The Factory menu item appears.

3.Press the F1 button to select Factory.

The Ld Fact Preset: > prompt appears.

4.Press the right-arrow button.

5.Press F2 to select Async_Dial.

6.Press F3 to select Save.

The Sav EditArea to > prompt appears.

7.Press F1 to save configuration changes to the Active(Saved) storage area.

Since you are changing the active area to a new set of options— Factory/ Async_Dial— the modem automatically runs a power-on self-test. The Idle:19.2 and Status Configure messages appear.

8.To return to the top-level menu at any time, press the double up-arrow button.

Loading the copied default settings

Load the default settings so that you can edit them for use with CMS. Proceed as follows.

1.On the front panel of the COMSPHERE 3910, press F2 to select Configure.

The Ld EditArea frm > prompt appears.

2.Press the right-arrow button once. The Active(Saved) prompt appears.

3.Press F1 to select Choose Function.

4.Press F1 to select Edit.

The Edit StrapGroup > prompt appears.

555-233-116 Issue 4 October 2002 103