Avaya 555-233-116 Draws attention to information that you may find helpful., Draws attention to information that you must heed., Denotes possible harm to software, possi bl e l oss of data, or possible service interruptions.

Conventions used in this book

Issue 4 October 2002 19555-233-116

■The word “system” is a general term encompassing all references to an

Avaya media server or gateway running MultiVantage Software.

■The term “ASAI” is synonymous with the newer CallVisor ASAI.

■Circuit pack codes (for example, TN780 or TN2182B) are shown with the

minimum acceptable alphabetic suffix (like the “B” in the c ode TN2182B).

Generally, an alphabetic suffix higher than that shown is also acceptable.

However, not every vintage of either the minimum suffix or a higher suffix

code is necessarily acceptable. A suffix of “P” means that firmware can be

downloaded to that circuit pack.

■The term “cabinet” refers to the external casing (shell) of an MCC1, SCC1 ,

CMC1, or G600 Media Gateway. Circuit packs are installed in the cabinet

in a specific carrier (row) and in a specific slot within th at carrier.

■The designation “UUCSSpp” refers to the location (address) of a cir cuit

pack in cabinet-carrier-slot order. In this address designation, UU is the

cabinet number, C is the carrier letter, SS is the slot number of a specific

circuit pack, and pp (if applicable) is a specific port on the circuit pack. A

sample address for port 4 on a circuit pack on an MCC1 Media Gateway

might look like this: 02A0704.

■A G700 Media Gateway uses media modules instead of c ircuit packs. The

media module address is designated as XXXVSpp, where XXX is the

administered number of the G700 Media Gateway, VS is the slot number of

a specific media module location on the G700 Media Gate way, and pp (if

applicable) is a specific port on the media module. The V is not a variable

and needs to be included in the command ex actly where shown. A sample

address for port 4 on an MM711 Media Module on a G700 Media Gate way

might look like this: 002V304. An S8300 Media Ser ver, if installed in a

G700 Media Gateway, must be in location V1.

Admonishments in this book have the following mean ings:

Tip:

Draws attention to information that you may find helpful.

NOTE:

Draws attention to information that you must heed.

!CAUTION:

Denotes possible harm to software, possi bl e l oss of data, or possible service interruptions.