Multimedia call handling (MMCH)
Issue 4 October 2002 215555-233-116
Configuring the PictureTel PCS50 (Live 50) and PCS100
These endpoints do not need any special configurati on settings. The standard
PictureTel configuration is as follows:
1. Load the LiveShare Plus sof tware first.
2. Enter the user name and co mpany name. Use default values for
subsequent prompts.
3. Enter a site name.
4. Select Restart Windows and F INISH.
5. Load the Live 50 VAFC drivers.
6. Load the Picture Tel Live 50 software.
7. Open the PictureTel Live program group from the Windows ™ Program
Manager screen.
8. Double click on the PictureTel Live Configure icon.
9. At the Welcom e screen, click on continue.
10. Go to the registration confirmation screen and click on continue.
11. Enter the Network Interface Settings. Be sure that “ISDN ” has an “x” in
the box. Click on continue.
12. At the ISDN Paramete rs screen, set the signaling protocol to USA
Canada: 5ESS Custom Point-to-Point. Click on continue.
13. At the Hardware Settings screen, set the following: Interrupt (IRQ ) to 11,
Base I/O Port=280, and Base Memory=D000. Unde r the Video Input
section, select the NTSC circle . Click on continue.
14. At the Audio Device screen, enter the necessary information.
15. At the Node Name screen, enter a nam e for the PC using the application
software package.
Table 25. Minimum system requirements
Ver s i o n: Live 50 version 1.7 or higher
Minimum Processor Speed: 487/33 MHz, DX2/77
Disk Space: 20 MB
Memory: 8 MB RAM, 17 MB recommended
ISA Expansion Slots (17-bit): 2 slots
Monitor: VGA, SVGA
Operating System: Windows™ 3.1x or Windows™ 95