Avaya 555-233-116 manual Wideband endpoints, Main distribution frame connection

Wideband endpoints

Main distribution frame connection

Figure 57 illustrates the main distribution frame method which connects a Avaya Media Server DS1 interface circuit pack, with a 25-pair cable to the MDF, to the customer-supplied digital line PC board in the MMCX, through a D8W cable.

1.	Avaya Media Server	5.	Public telephone network
2.	DS1 interface circuit pack	6.	103A or modular wall jack
3.	25-pair cable	7.	D8W 4-pair modular cord
4.	Main distribution frame (MDF)	8.	MMCX server
Figure 57.	MMCX connected to an Avaya Media Server through the MDF

Wideband endpoints

Wideband endpoints include video equipment or bridges/routers for LANs. Use the running list that accompanies the system to make cable connections.

Nonsignaling configuration

A nonsignaling connection to a wideband endpoint may connect to a channel service unit (CSU). If not using a CSU, the distance between the system and the endpoint is limited to a few hundred feet. See Figure 58. The maximum distance depends on the type of cable and type of endpoint.

NOTE:

The MM710 media module (for the G700 Media Server) has a built-in channel service unit (CSU). Therefore, the CSU in Figure 58 and Figure 59, plus the references in the accompanying text about distance limitations when working without a CSU, do not apply to a G700 Media Gateway configuration.

555-233-116 Issue 4 October 2002 209