ISDN converters and adapters

Converters for single-carrier cabinets

PRI-to-DASS and PRI-to-DPNSS converters

Figure 34 shows typical connections from the CCSC-1 PRI-to-DASS converter or the CCSC-2 PRI-to-DPNSS converters to the coaxial facility.

1.To TN464F DS1 circuit pack and either a CSCC-1 PRI-to-DASS converter or a CSCC-2 PRI-to- DPNSS converter circuit pack

2.Administration PC

3.RS-232 cable to front of PRI converter circuit pack

4.888B coaxial converter

5.Coaxial connection to 2-Mbps facility

6.Coaxial cable from PRI converter circuit pack to coaxial converter

Figure 34. Typical DASS or DPNSS converter cabling

1.Plug the PC into the RS-232 connector on the front of the PRI converter circuit pack.

2.Connect the coaxial Y-cable from the TN464F to the PRI converter circuit pack.

3.Connect the opposite end of the Y-cable to the 888B coaxial converter.

158 Issue 4 October 2002

555-233-116

Page 158
Image 158
Avaya 555-233-116 manual Converters for single-carrier cabinets, PRI-to-DASS and PRI-to-DPNSS converters