Avaya 555-233-116 manual Registered music source, Nonregistered music source

Music-on-hold

	1	3		4
		2		5	6
					7
				cydfmusc RPY 090397
1.	Music source		5.	Tip (green) and ring (red)
2.	4-pair modular cord		6.	Part of main distribution frame
3.	103A or modular wall jack		7.	A25D 25 pair cable (male-to-male) to
4.	122A music adapter (if required— primarily			auxiliary trunk circuit pack
	required in France)

Figure 45. Typical registered equipment connections (auxiliary access) for an MCC1, SCC1, CMC1, or G600 Media Gateway

1.If the music source is registered, the system side of the MDF connects directly to the system.

2.If the music source is not registered, the system side of the MDF connects to a 909A/B universal coupler (see Chapter 1, ‘‘909A/B universal coupler’’).

Registered music source

Refer to Figure 45 to install a registered music source.

1.Determine feature port assignment from Feature-Related System Parameters form.

2.Install music source according to the manufacturer’s instructions.

3.Install patch cord/jumper wires at the main distribution frame.

4.Administer the switch for the new equipment.

Nonregistered music source

Refer to Figure 46 and Figure 47 when installing a nonregistered music source.

1.Determine feature port assignment from Feature-Related System Parameters Form.

2.Install the music source according to the manufacturer’s instructions.

192 Issue 4 October 2002 555-233-116