Avaya 555-233-116 Multi-Tech MT5634ZBA-USB, Administration, Configuring the MT5634ZBA-USB modem

External modems

Multi-Tech MT5634ZBA-USB

Avaya recommends using a Multi-Tech modem, model MT5634ZBA-USB, for use with an S8300/G700 configuration.

To connect a Multi-Tech modem for a G700 Media Gateway/S8300 Media Server configuration:

■Plug the USB connector of the Multi-Tech modem into one of the two USB ports on the front of an S8300 Media Server.

■Connect the phone cable to the modem.

NOTE:

The Multi-Tech modem, model MT5634ZBA-USB, is also used for the S8700 Media Server.

Configuring the MT5634ZBA-USB modem

The Multi-Tech MT5634ZBA-USB modem either gets configured automatically through the USB port with the factory defaults. No special configuration is necessary.

Administration

You have to administer each modem that you attach to the system.

NOTE:

Only the basic procedure is covered here. For the full range of options, see the Administrator’s Guide for Avaya MultiVantage Software, 555-233-506.

Accessing the administration form

1.Open the modem-administration form. At the management terminal, enter change system-parameters maintenance.

2.Scroll to page 3 of the form.

Identifying the modem

1.On the modem-administration form, set the Modem Connection: field to external (it should be set to none if no modem is installed).

This field generates alarms if it is not administered correctly. It cannot be set to none if Alarm Origination is activated.

2.Set the Modem Name: field to a unique, 20-character, alphanumeric identifier.

110 Issue 4 October 2002 555-233-116