Avaya 555-233-116 manual Antistatic protection, Remove/install circuit packs, Physical dimensions

About this book

! WARNING:

Denotes possible harm to hardware or equipment.

! DANGER:

Denotes possible harm or injury to your body.

! SECURITY ALERT:

Indicates when system administration may leave your system open to toll fraud.

Physical dimensions

■All physical dimensions in this book are in English units (feet [ft]) followed by metric (centimeter [cm]) in parenthesis.

■Wire gauge measurements are in AWG followed by the diameter in millimeters in parenthesis

Antistatic protection

! WARNING:

To minimize electrostatic discharge (ESD), always wear an authorized wrist ground strap. Connect the strap to an approved ground, such as an unpainted metal surface, before handling circuit packs, media modules, or any components.

Remove/install circuit packs

! CAUTION:

Do not remove or install control circuit packs (circuit packs with white labels) when the power is on in an MCC1 Media Gateway. Damage may occur. Make sure the power is off before removing or installing control circuit packs. Port circuit packs (circuit packs with gray labels—older version circuit packs had purple labels) can be safely removed or installed when the power is on.

Do not remove or install media modules when the power is on in a G700 Media Gateway. Damage may occur. Make sure the power is off before removing or installing a media module.

20 Issue 4 October 2002 555-233-116