Connect data modules
Issue 4 October 2002 91555-233-116
23. When the SET LL DETECT? prompt appears, press the NEXT/NO button
to skip this setting.
24. When the SET RI LEAD? prompt appears, press the ENTER/YES button.
25. Press the NEXT/NO button until the RI = correctValue? or RI -
>correctValue? prompt appears. Then press the ENTER/YES button.
26. When the CONTINUE? prompt appears, press the ENTER/YES button.
27. When the SET RL LEAD? prompt appears, press the NEXT/NO button to
skip this setting.
28. When the SET SIGLS DISC? prompt appears, press the ENTER/YES
button.
SET LL DETECT? DATA NEXT/NO BACK ENTER/YES
●➜ ● ❍ ❍
Push the button indicated by the arrow (➜)
SET RI LEAD? DATA NEXT/NO BACK ENTER/YES
●❍❍ ➜ ●
Push the button indicated by the arrow (➜)
SET RI = ON? DATA NEXT/NO BACK ENTER/YES
●❍❍ ➜ ●
Push the button indicated by the arrow (➜)
SET RL LEAD? DATA NEXT/NO BACK ENTER/YES
●➜ ● ❍ ❍
Push the button indicated by the arrow (➜)
SET SIGLS DISC? DATA NEXT/NO BACK ENTER/YES
●❍❍ ➜ ●
Push the button indicated by the arrow (➜)