Avaya 555-233-116 manual Testing

Terminal server installation

■Host: C-LAN IP Address

■Remote Port: C-LAN Ethernet port where IP adjunct service is offered

■Local Port: must match the value of Remote Port on the DEFINTY IP Services screen

6.Press ENTER and select Save & Exit to effect the changes.

7.Press ENTER again to view the Administration Menu.

8.Select kill to disable the port connection.

9.Repeat the steps for each additional port you want to administer.

10.When administration is complete, from the Connections Menu, select logout (or press Ctrl D).

11.Close HyperTerminal.

At this point, you have established a connection path from the adjunct through the IOLAN+ to the C-LAN circuit pack.

Testing

1.On the system management terminal, press ENTER to get the login prompt to the DEFINITY switch.

NOTE:

If you get garbled text, check the baud rate setting on the Port Setup Menu. You can adjust it up or down.

2.If no login prompt appears, log back into the IOLAN+ through HyperTerminal.

3.Select Admin mode > stats and press ENTER twice.

4.Select users and press ENTER.

5.Look at the port that the adjunct is connected to and see if there is any traffic. If not, check all your connections and administration fields.

130 Issue 4 October 2002 555-233-116