Avaya 555-233-116 manual Setting the automatic-answer feature on 7400A DCE

Data modules and asynchronous data units

6. The SET 19200 SPEED? prompt appears. Press the NEXT/NO button.

SET 19200 SPEED?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

7.If you selected the AT-command interface in the section ‘‘Setting interface options on 7400A DCE’’, you are finished configuring the 7400A data module.

Setting the automatic-answer feature on 7400A DCE

You can set up the 7400A data module to automatically answer calls or you can have it ignore calls until an operator answers manually. Set up the data module for automatic answering unless specifically directed to otherwise.

1. When the SET ANSWER? prompt appears, press the ENTER/YES button.

SET ANSWER?
	DATA	NEXT/NO		BACK		ENTER/YES
	●		❍		❍	➜ ●
Push the button indicated by the arrow (➜ )

2.When the ANS = AUTO? prompt appears, if you want to enable automatic answering, press the ENTER/YES button. Otherwise, press the NEXT/NO button.

ANS = AUTO?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ❍

Select an option (NEXT/NO or ENTER/YES)

3.If you pressed NEXT/NO in the preceding step, the ANS —> MANUAL? prompt appears. If you want to disable automatic answering, press the ENTER/YES button. Otherwise, press the NEXT/NO button.

ANS —> MANUAL?

DATA NEXT/NO BACK ENTER/YES

● ❍ ❍ ❍

Select an option (NEXT/NO or ENTER/YES)

64 Issue 4 October 2002 555-233-116