Data modules and asynchronous data units
555-233-116
74 Issue 4 October 2002
6. If you pressed ENTER/YES in the preceding s tep and the
CI2 LEAD = ON? prompt appears press the ENTER/YES button again to
confirm your selection.
7. When the SET CH LEAD? prompt appears, press the NEXT/NO button to
keep the default (OFF) or the ENTER/YES button to make a change.
8. If you pressed ENTER/YES in the preceding step and the CH LEAD = ON?
prompt appears, press the ENTER/YES button again to confirm your
selection.
9. If the SET CH2 LEAD? prompt appears, press the NEXT/NO button to
keep the default (OFF) or the ENTER/YES button to make a change.
CI2 LEAD=ON? DATA NEXT/NO BACK ENTER/YES
●❍❍➜ ●
Push the button indicated by the arrow (➜)
SET CH LEAD? DATA NEXT/NO BACK ENTER/YES
●● ?❍● ?
Choose a button indicated by the question mark (?)
CH LEAD=ON? DATA NEXT/NO BACK ENTER/YES
●❍❍➜ ●
Push the button indicated by the arrow (➜)
SET CH2 LEAD? DATA NEXT/NO BACK ENTER/YES
●● ?❍● ?
Choose a button indicated by the question mark (?)