Avaya 555-233-116 manual Normal connection, Atlas/Spain platform connection

DEFINITY INADS

Standard reliability

Normal connection:

1.Connect a system telephone to station 10 on the PARTNER system.

2.Connect a standard RJ-11 telephone line cord from the PARTNER CO line to the CO line protector.

3.Connect the INADS tip and ring port from the AUX connector to the tip/ring pair of CO line port 1 on the PARTNER through the MDF. See Figure 43. Use wire pair 50 and 25 on the MDF.

U.S./Atlas/Spain platform connection:

1. Select station 11-15 as the INADS port connection.

European platform connection:

1.Bridge the outside pair of CO line port 1 to the INADS port. A 258A adapter may be used.

High reliability

Be sure that the TN1648B SYSAM circuit packs are located in different cabinets or processor carriers.

1.Bridge the 2 INADS tip/ring ports. A 258A adapter may be used. See Figure 43.

2.Connect the bridged INADS tip/ring port to a station port.

PARTNER administration

Set standard telephone station (European platforms only)

NOTE:

Do not exit from the programming mode until instructed to do so.

1.Connect the PARTNER programming telephone (MLS12) to station 10.

2.Press Feature, followed by 0 0.

3.Press the left intercom (System Program) button twice.

4.Enter the password. The default password is 7777. The green LED next to the left intercom button must be steady on.

5.Enter # 3 0 8.

6.Enter 1 0 (if station 10 is connected to the INADS port) or the station number connected to the INADS port.

555-233-116 Issue 4 October 2002 185