Connect data modules
Issue 4 October 2002 81555-233-116
2. When SET SPEED? appears, press the ENTER/YES button.
The current transmission speed appears: SPEED = 56KBPS? (the
default) or SPEED =64KBPS?
3. To keep the existing speed, press the ENTER/YES button.
4. To change the existing speed, press NEXT/NO.
When the SPEED ->NewSpeed? prompt appears, press the ENTER/YES
button.
5. The CONTINUE? prompt appears. Press the ENTER/YES button.
6. If you want to set any other options, skip to the following section.
SET SPEED? DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow (➜)
SPEED = 56 KBPS? DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow (➜)
SPEED = 56 KBPS? DATA NEXT/NO BACK ENTER/YES
●➜ ● ❍ ❍
Push the button indicated by the arrow (➜)
SPEED -> 64 KBPS? DATA NEXT/NO BACK ENTER/YES
● ❍ ❍ ➜ ●
Push the button indicated by the arrow (➜)
CONTINUE? DATA NEXT/NO BACK ENTER/YES
●❍❍➜ ●
Push the button indicated by the arrow (➜)