Avaya 555-233-116 manual Setting the break-disconnect option on 7400A DCE

Connect data modules

4. The CONTINUE? prompt appears. Press the ENTER/YES button.

CONTINUE?
	DATA	NEXT/NO		BACK		ENTER/YES
	●		❍		❍	➜ ●

Push the button indicated by the arrow (➜ )

Setting the break-disconnect option on 7400A DCE

This setting specifies the length of the BREAK signal, a string of 10 or more spaces that tells the host that the user needs to interrupt operations. There are three options: TRIPLE, LONG (the default), and NONE. Accept the default values, unless otherwise instructed.

1.When the SET BREAK DISC? prompt appears, press the NEXT/NO button to keep the default.

SET BREAK DISC?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

Configuring the RS-232 interface on 7400A DCE

You can set each pin of the RS-232 cable to meet the needs of specific applications or connected equipment. however, in most cases, you can use the defaults.

To set the EIA leads, proceed as follows:

1.When the SET LeadName LEAD? prompt appears, press the NEXT/NO button to keep the default or the ENTER/YES button to make a change.

SET LeadName LEAD?
	DATA	NEXT/NO	BACK	ENTER/YES
	●	➜ ●	❍	❍

Push the button indicated by the arrow (➜ )

555-233-116 Issue 4 October 2002 65