Avaya 555-233-116 manual Typical multimedia call handling connections

Multimedia call handling (MMCH)

1.DCP telephone, 2 or 4 wire to match type of circuit pack

2.Personal computer

3.BRI adapter

4.D8W cord

5.103A or modular wall jack

6.Main distribution frame

7.25-pair cable to digital line circuit pack

8.25-pair cable to BRI circuit pack or NT1, 4-to-2 wire adapter

9.Avaya Media Server

10.Multimedia-interface circuit pack

11.Voice conditioner circuit pack

Figure 61. Typical multimedia call handling connections

NOTE:

The NT1 adapter (item #8) is not used with a MM720 BRI module. The NT1 is a 2/4 converter unit, and the MM720 currently only supports 4-wire trunking.

In items #7 and #8 above, the connection to both an MM712 DCP media module and to an MM720 BRI media module is not a 25-pair cable but rather an RJ45 cable.

1.Each PC MMCH endpoint must contain a BRI adapter.

2.Connect a DCP telephone to a digital line circuit pack. The DCP telephone must be used in conjunction with the PC. Refer to the tables at the end of this chapter for the pinout of the digital line circuit pack.

3.Connect the PC BRI adapter to any BRI port on the Avaya Media Server. Refer to the tables at the end of this chapter for the pinout of an ISDN BRI circuit pack.

555-233-116 Issue 4 October 2002 213