Avaya 555-233-116 Configuring RS-232 RTS and CTS send signals, Configuring various control features, Finishing configuration of the DTE interface

Paradyne COMSPHERE 3910
Issue 4 October 2002 105555-233-116
5. Press F2 to select Stndrd_RS232.
6. Press F1 to select Nxt.
The RTS Action menu heading appears.
Configuring RS-232 RTS and CTS send signals
Next you set the parameters that the modem uses to offer and acc ept data,
Request To Send (RTS) and Clear To Send (CTS).
1. From the RTS Action menu heading, press the right-arrow button once.
The Stndrd_RS232 menu item appears.
2. Press F2 to select Stndrd_RS232.
3. Press F1 to select Nxt.
The CTS Control menu heading appears.
4. Press the right-arrow button once.
The Stndrd_RS232 menu item appears.
5. Press F2 to select Stndrd_RS232.
6. Press F1 to select Nxt.
The RTS/CTS Delay (0 msec) menu heading appears.
Configuring various control features
Now set the Line Signal Detect (LSD, also known as DCD or Data Carrier Detect)
control and rate controls.
1. Press F1 to select Nxt.
The LSD Control (Stndrd_RS232) menu heading appears.
2. Press F1 to select Nxt.
The CT111_Rate Cntl (Disable) menu heading appears.
3. Press F1 to select Nxt.
The DTE_Rate=VF (Disable) menu heading appears.
4. Press F1 to select Nxt.
The Extend Main Ch. (Disable) menu heading appears.
Finishing configuration of the DTE interface
1. Press F1 select End.
The Edit StrapGroup > prompt appears.