Security
6.When you are prompted to continue, press enter.
7.To save your preferences and exit the Setup utility:
a.Press esc (or select Exit from the menu bar).
b.Select Exit Saving Changes.
c.Then follow the instructions on the screen.
Changing a Power-On Password
To change a
1.Open the Setup utility by pressing F10 while the “Press <F10> to enter setup” prompt is displayed in the lower left corner of the screen.
2.Select Security from the menu bar. (To select a menu, use the arrow keys.)
3.Select the
4.Type the current password in the Enter Current Password field, and then press enter.
5.Type the new password in the Enter New Password field, and then press enter.
6.Type the new password in the Confirm New Password field, and then press enter.
7.When you are prompted to continue, press enter.
8.To save your preferences and exit the Setup utility:
a.Press esc (or select Exit from the menu bar).
b.Select Exit Saving Changes.
c.Then follow the instructions on the screen.
Software Guide |