Fan Blade Cleaning

CLEANING/MAINTENENCE

•Turn the fan off and unplug the unit.

•Clean the Fan Head, Base, and Pole using a damp cloth and a mild detergent, if necessary. Make certain all detergent residue is removed.

•Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit.

•Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing.

1)Make certain the fan is unplugged. Loosen the Grill Ring using a Phillips screwdriver, and remove the Front Grill. Remove the Fan Blade Cap (turn clockwise), then the Fan Blade.

2)The Fan Blade and Grill may be cleaned with a damp cloth and mild detergent.

3)Reassemble the fan after the parts have dried completely. Do not plug the fan into an electrical outlet until it is fully reassembled.

OVERHEAT PROTECTION

A thermostat is built-in to the motor to prevent overheating. If the fan temperature exceeds the limit on the thermostat, the fan will automatically shut-off to prevent overheating and protect the fan components from damage.

REMOTE CONTROL

The supplied remote uses 2 “AAA” batteries. The remote will work at a distance of roughly 25 feet, and an angle of 60°.

STORAGE

When not in use, store the fan in a cool, dry location. To prevent dust and dirt build-up, use the old packaging to repack the unit.

Printed in China