9.If it is necessary to replace any of the display assembly internal components, remove the following screw covers and screws. The display screw covers are included in the display screw kit, spare part number
(1)Two Mylar screw covers on the display bezel bottom edge
(2)Two Phillips PM2.5×4.0 screws
10.Flex the inside edge of the top (1), the left and right sides (2), and the bottom (3) of the display bezel until the bezel disengages from the display back cover.
11.Remove the display bezel (4). The display bezel is available using spare part number
76 Chapter 4 Removal and replacement procedures | ENWW |