12.If it is necessary to replace the webcam module, disconnect the webcam cable (1) from the module. Lift the webcam from the
13.If it is necessary to replace the display panel, remove the eight Phillips PM2.5×5.0 screws (1) that secure the display panel to the display enclosure, and then lift the panel from the enclosure
(2). The display panel is available using the spare part number
14.If it is necessary to replace the display cable, follow these steps:
a.Turn the display panel upside down in front of you.
b.Peel back the tape that secures the cable to the display (1).
c.Unplug the cable from the display (2).
d.Remove the cable from the display (3).
ENWW | Component replacement procedures 77 |