CAUTION: Keep the protection card in the slot when no PC card is installed.
Note: Do not make any hardware change by yourself.
*Only available on specific models.
Follow these steps to insert a PC card:
1.Install the PCMCIA software.
2.Locate the PC card slot on the left side of the notebook.
3.A protection card is installed inside the PC card slot to serve as a cover for the slot. This cover protects the slot against foreign matters such as the dust and water. Before using a PC card, press the eject button to remove the protection card.
4.Slide the PC card with its label facing up into the slot until the eject button pops out.
5.To remove a PC card, press the eject button.
Eject Button
Figure 4-1. Installing a PC Card
Memory Upgrade
You could upgrade your notebook memory to a maximum of 192/256MB* by installing the Compaq approved memory module. Please refer to your dealer for assistance to get the proper Compaq memory module for upgrading.
My Presario – Getting Started | System Expansion |