HP 80XL302 Moving Around and Making Selections, Using the Touchpad/Mouse, Using the Keyboard

	The SCU screen can be divided into four areas:
	•	On the top line of the screen is the menu bar, which lists the titles
		of the available menus. Each menu title contains a pull-down
		menu, which displays items for settings.
	•	The left column on the screen displays current settings of the
		system. If you open a pull-down menu and select an item that
		provides multiple options, the left column will display a submenu
		where you can make further selections.
	•	The right column on the screen provides details of the selected
		item.
	•	The bottom part of the screen provides keyboard/mouse
		instructions for moving around and making selections.
	Moving Around and Making Selections
	You must go through two or three levels to complete the setting for
	an item. In most cases, there are three levels: menu title, pull-down
	menu, and submenu.
	To move around and make selections, you can use both the
	touchpad/mouse and keyboard.
	Using the Touchpad/Mouse
	You are advised to use the touchpad or mouse. It is more
	straightforward than using the keyboard.
	For most items, simply move the pointer with the touchpad/mouse
	and left-click on the intended item. To cancel your selection, click the
	right button. For some items, you will need to select with the arrow
	keys.
	Using the Keyboard
	Keyboard information can be found at the bottom of the screen. You
	can also use the shortcut key, which is highlighted in a different color
	on the screen.
	Described below is the general procedure to complete a setting by
	use of the keyboard:
	1. Select a menu title with the left/right arrow key and press [Enter] to
		pull down the menu. You can directly pull down a menu by
		pressing the shortcut key.
	2. From the pull-down menu, select an item with the up/down arrow
		key and press [Enter] to access the submenu. You can directly
		access the submenu by pressing the shortcut key. The submenu
		displays the options you can select. If no submenu appears,
		simply press [Enter] to enable or disable the specific function.
	3. For most menu items, pressing the [Tab] key will jump from one
		item to another, thus allowing you to go through the items quickly.
		To confirm the changes you make, press [Enter] or select the OK
		button. To cancel the changes, press [Esc] or select the Cancel
Setup Configuration Utility 5-2		My Presario – Getting Started