![](/images/new-backgrounds/1153141/15314145x1.webp)
CD and DVD Software
To erase DirectCD formatting from a rewritable medium so the medium can be used with Easy CD Creator or CD Copier:
1.Insert the medium into an optical drive. (If you are prompted to install UDF Reader, refer to “Responding to the UDF Prompt” earlier in this section.)
2.Access the Easy CD Creator Basic Eraser:
❏In Windows 2000 Professional, select Start > Programs > Easy CD Creator Basic >
❏In Windows XP Home or Windows XP Professional, select Start > All Programs > Easy CD Creator Basic >
3.Select the Erase button.
4.Select the OK button.
Selecting Easy CD Creator Settings
To use DirectCD, Easy CD Creator, or CD Copier, the settings shown in the following table must be selected. These settings are compatible; for example, the settings for DirectCD do not conflict with the settings for CD Copier.
The Easy CD Creator software installs with all of these settings selected. Before beginning any copying procedure, you may want to confirm that these settings have not been changed.
Application | Required Settings |
|
|
DirectCD | Enable Auto Insert Notification |
|
|
Easy CD Creator | Disable |
| and |
| Enable |
|
|
CD Copier | Disable |
|
|
Software Guide |