HP 2823TC, 2899AP, 2897AP, 2896AP, 2898AP, 2892AP, 2893AP, 2891AP manual Selecting from the Advanced Menu

Select

To Do This

Device Options (continued)

■ Enable/disable USB legacy support

for a USB keyboard, mouse, and

hubs. When USB legacy support is

enabled:

❖ A USB keyboard, mouse, and

hubs work even when a Windows

operating system is not loaded.

❖ The notebook can start from a

bootable hard drive, diskette

drive diskette, SuperDisk drive

disk, or CD-ROM, CD-RW, or

DVD inserted into a drive

connected by USB to the

notebook or an optional port

replicator.

■ Enable/disable all settings in the

SpeedStep window. (When Disable is

selected, the notebook runs in

Battery Optimized mode.)

■ Specify how the notebook recognizes

multiple identical port replicators that

are identically equipped. (Select

Disable to recognize the port

replicators as a single port replicator;

select Enable to recognize the port

replicators individually, by serial

number.)

■ Enable/disable the reporting of the

processor serial number by the

processor to the software.

■ Enable/disable inclusion of an internal

peripheral interconnect (PCI) Network

Interface Card (NIC) in MultiBoot.

Software Guide

7–7