This checklist provides
Software and Hardware Requirements
The following table provides a checklist of the required software versions and, if applicable, any items to execute before beginning the installation. Place a checkmark (3) in the box after completing each step.
3 | Software and Hardware Requirements |
|
|
Before installing your HP ProLiant F200 for MSA1500 cluster solution, it is very important to refer to the HP Cluster Configuration Support website for details on components that make up a valid cluster configuration. There is a support matrix for each HP Cluster that details components that represent quality tested and supported HP Cluster configurations.
Using the link below, select the appropriate operating system and storage platform and then refer to the row of deliverables that are relevant to the configuration you require.
The HP Cluster Configuration Support website can be found at
SmartStart CD.
Two supported ProLiant servers, supported Fibre Channel Adapters (FCA), two or more supported network adapters, two supported Fibre Channel switches or hubs, and one or more MSA1500(s).
Review and understand any Read This First (RTF) and Getting Started cards that were shipped with the product.
Microsoft Windows Server 2003, Enterprise Edition software and documentation.
If applicable, Microsoft Windows Server 2003, Enterprise Edition service pack.
HP StorageWorks MSA1500 Support Software CD.
Array Configuration Utility (ACU), which is located on the HP StorageWorks MSA1500 Support Software CD.
HP Insight Manager (optional).
MSA1500 controller firmware.
EMU firmware.
FCA firmware and boot bios.
Fibre Channel switch firmware.
HP StorageWorks for Windows Secure Path Workgroup Edition (Included in the ProLiant Cluster F200 for Entry Level SAN Cluster Kit).
Sufficient software rights to install the operating system and software applications on each node.
Ensure all hardware is installed and properly cabled as shown in figure 1 - hardware cabling scheme on page 3.
4