HP FCA2214DC I-X manual Adapter Features

Page 14

Adapter Features

Adapter Features

The FCA2214/FCA2214DC HBAs are 2-Gb, high-performance Direct Memory Access (DMA) bus master host adapters designed for high-end systems. The performance is derived from the ISP2312 chips.

These HBAs have the following features:

Combines a powerful Reduced Instruction Set Computing (RISC) processor, a Fibre Channel protocol manager (FPM) with 2-Gb Fibre Channel transceivers, and a peripheral component interconnect (PCI) or peripheral component interconnect-extended (PCI-X) local bus interface in a single-chip solution.

Supports Private Loop Direct Attach (PLDA) and Fabric Loop Attach (FLA) connections.

Fast!UTIL BIOS utility to customize the configuration parameters on the adapter and attached drives.

Supports bus master DMA.

Supports Fibre Channel protocol-SCSI (FCP-SCSI), IP, and Fibre Channel-Virtual Interface (FC-VI) protocols.

Supports point-to-point fabric connection (F-PORT FABRIC LOGIN).

Complies with:

PCI Local Bus Specification revision 2.2.

PCI-X Addendum (revision 1.0) to the PCI Local Bus Specification.

Third-generation Fibre Channel-Physical and Signaling Interface (FC-PH-3) standard.

Fibre Channel-Arbitrated Loop (FC-AL-2) standard.

U.S. and international safety and emissions standards

14FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation Guide

Image 14
Contents Hp StorageWorks FCA2214/FCA2214DC PCI-X Host Bus Adapters For Linux, NetWare, and WindowsPage Contents Installing the NetWare Driver Figures Contents About this Guide Related Documentation OverviewIntended Audience Document conventions Text symbolsConventions Equipment symbols About this Guide HP storage web site HP authorized reseller Getting helpHP technical support Adapter Features Adapter Features Environmental Specifications Adapter SpecificationsType Specification Installing the Adapter Refer to your host documentation for installing the HBAInstallation Prerequisites Adapter ComponentsLED Indicators Before You Begin Installation JumpersInstalling the Adapter Installation Considerations Installing the Linux Driver Installing the Driver Building a Driver from the SourcesBuilding a Multiprocessor Version of the Driver Installing the Driver on the Boot Drive Loading the DriverFor example Loading and Unloading the qla2300 Driver Manually System Driver Parameter maxscsiluns Append=maxscsiluns=128Driver Command Line Parameters Proc Filesystem SupportInstalling the Windows Driver Installing a New Windows Driver Following message displaysFollowing message displays Choose Start Settings Control Panel System Updating an Existing Windows DriverInstalling the NetWare Driver NetWare Driver Files and Parameters, Installing the Driver,NetWare Driver Files and Parameters Parameter DescriptionChoose Configure disk and storage device drivers Load QL2300.HAM Load NWASPI.CDM Troubleshooting6 Hardware Problem Checklist System Configuration Problems Fibre Channel Problem ChecklistTroubleshooting Fast!UTIL Configuration Settings Host Adapter SettingsAdvanced Adapter Settings Selectable Boot SettingsRestore Default Settings Raw Nvram DataSetting Options Default Fast!UTIL Extended Firmware Settings Firmware Settings. lists the default settings for the HBAConnection Options Type of Connection Select Host Adapter Scan Fibre Channel DevicesFibre Disk Utility Regulatory Compliance Notices Federal Communications Commission Notice Class a EquipmentCanadian Notice Avis Canadien ModificationsNetwork and Serial Cables Class a Equipment Japanese Notice Japanese Class a NoticeCompliance with Cdrh Regulations Laser Safety WarningsLaser Devices Compliance with International RegulationsRegulatory Compliance Notices Electrostatic Discharge Grounding Methods Index Index Index Index