HP FCA2214DC I-X manual NetWare Driver Files and Parameters, Parameter Description

Page 36

Installing the NetWare Driver

NetWare Driver Files and Parameters

For this adapter to function properly with the Modular Smart Array 1000 (MSA1000), cpqshd.cdm version 0.200 or later has to be loaded on the server.

When loading the QL2300.HAM driver, the driver switches listed in Table 5 are required. They are added automatically if you install your driver with the NWCONFIG utility. Changing or omitting these switches may lead to unpredictable results or your server not seeing the storage devices on the SAN. For a complete list of driver switches, please refer to the README.TXT file that came with the driver.

Table 5: QL2300.HAM Driver Parameters

Parameter

Description

SLOT = n

Specifies to NetWare the PCI slot (slot n) in which the FCA2210 board is

 

installed. The driver must be loaded once for each FCA2210 board in your

 

system. For example:

 

LOAD QL2x00.HAM SLOT=3

 

 

LUNS

Specifies to NetWare to scan for all luns during the load of this driver

 

instance (otherwise NetWare will only scan for lun zero devices); the

 

scanned lun number range is 0 to (n - 1) where n is specified by the

 

/MAXLUNS=n option. This switch is required for multi-LUN storage

 

subsystems, for example, RAID subsystems. For example:

 

LOAD QL2x00.HAM SLOT=3 /LUNS

 

 

/ALLPATHS

Disables failover and reports to NetWare all devices on all adapter paths;

 

this allows upper layer modules to do failover across a Netware server's

 

multiple adapters. For example:

 

LOAD QL2x00.HAM SLOT=3 /LUNS /ALLPATHS

 

 

/PORTNAMES

Internally tracks devices by portname rather than nodename; this is

 

required when storage luns do not have a 1:1 correspondence across

 

portnames; this allows upper layer modules to do failover across a storage

 

subsystem's multiple ports. For example:

 

LOAD QL2x00.HAM SLOT=3 /LUNS /PORTNAMES

 

 

/MAXLUNS=n

Set the maximum number of luns allowed during the lun scan; default is

 

n=32. The range of luns searched is 0 to (n-1). For example:

 

LOAD QL2x00.HAM SLOT=3 /LUNS /MAXLUNS=332

 

 

36FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation Guide

Image 36
Contents Hp StorageWorks FCA2214/FCA2214DC PCI-X Host Bus Adapters For Linux, NetWare, and WindowsPage Contents Installing the NetWare Driver Figures Contents About this Guide Overview Intended AudienceRelated Documentation Text symbols ConventionsDocument conventions Equipment symbols About this Guide Getting help HP technical supportHP storage web site HP authorized reseller Adapter Features Adapter Features Environmental Specifications Adapter SpecificationsType Specification Installing the Adapter Refer to your host documentation for installing the HBAInstallation Prerequisites Adapter ComponentsLED Indicators Before You Begin Installation JumpersInstalling the Adapter Installation Considerations Installing the Linux Driver Installing the Driver Building a Driver from the SourcesBuilding a Multiprocessor Version of the Driver Installing the Driver on the Boot Drive Loading the DriverFor example Loading and Unloading the qla2300 Driver Manually System Driver Parameter maxscsiluns Append=maxscsiluns=128Driver Command Line Parameters Proc Filesystem SupportInstalling the Windows Driver Installing a New Windows Driver Following message displaysFollowing message displays Choose Start Settings Control Panel System Updating an Existing Windows DriverInstalling the NetWare Driver NetWare Driver Files and Parameters, Installing the Driver,NetWare Driver Files and Parameters Parameter DescriptionChoose Configure disk and storage device drivers Load QL2300.HAM Load NWASPI.CDM Troubleshooting6 Hardware Problem Checklist System Configuration Problems Fibre Channel Problem ChecklistTroubleshooting Fast!UTIL Configuration Settings Host Adapter SettingsSelectable Boot Settings Restore Default SettingsAdvanced Adapter Settings Raw Nvram DataSetting Options Default Fast!UTIL Extended Firmware Settings Firmware Settings. lists the default settings for the HBAConnection Options Type of Connection Scan Fibre Channel Devices Fibre Disk UtilitySelect Host Adapter Regulatory Compliance Notices Federal Communications Commission Notice Class a EquipmentModifications Network and Serial CablesCanadian Notice Avis Canadien Class a Equipment Japanese Notice Japanese Class a NoticeLaser Safety Warnings Laser DevicesCompliance with Cdrh Regulations Compliance with International RegulationsRegulatory Compliance Notices Electrostatic Discharge Grounding Methods Index Index Index Index