HP FCA2214DC I-X manual Following message displays

Page 33

Installing the Windows Driver

If you are adding additional HBAs to the system, or if you are installing the FCA2214DC, Windows detects another device when the system reboots. The Found New Hardware with FCA2214 PCI Fibre Channel Adapter message displays. Perform the following steps to complete the driver installation:

1.When the Insert Disk message displays, make sure the CD-ROM is inserted and click OK.

2.Click Finish in the Found New Hardware Wizard/Completing the Found New Hardware Wizard screen.

3.The following message displays:

Your hardware settings have changed. You must restart your computer for these changes to take effect. Do you want to restart your computer now?

4.Click Yes.

5.Repeat step 1 through step 4 for any additional HBAs. Make sure to reboot after installing the driver for the last HBA.

FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation	33
Guide

Image 33

Contents For Linux, NetWare, and Windows Hp StorageWorks FCA2214/FCA2214DC PCI-X Host Bus AdaptersPage Contents Installing the NetWare Driver Figures Contents About this Guide Overview Intended AudienceRelated Documentation Text symbols ConventionsDocument conventions Equipment symbols About this Guide Getting help HP technical supportHP storage web site HP authorized reseller Adapter Features Adapter Features Adapter Specifications Environmental SpecificationsType Specification Refer to your host documentation for installing the HBA Installing the AdapterAdapter Components Installation PrerequisitesLED Indicators Jumpers Before You Begin InstallationInstalling the Adapter Installation Considerations Installing the Linux Driver Building a Driver from the Sources Installing the DriverBuilding a Multiprocessor Version of the Driver Loading the Driver Installing the Driver on the Boot DriveFor example Loading and Unloading the qla2300 Driver Manually Append=maxscsiluns=128 System Driver Parameter maxscsilunsProc Filesystem Support Driver Command Line ParametersInstalling the Windows Driver Following message displays Installing a New Windows DriverFollowing message displays Updating an Existing Windows Driver Choose Start Settings Control Panel SystemNetWare Driver Files and Parameters, Installing the Driver, Installing the NetWare DriverParameter Description NetWare Driver Files and ParametersChoose Configure disk and storage device drivers Load QL2300.HAM Load NWASPI.CDM Troubleshooting6 Hardware Problem Checklist Fibre Channel Problem Checklist System Configuration ProblemsTroubleshooting Fast!UTIL Host Adapter Settings Configuration SettingsRestore Default Settings Selectable Boot SettingsAdvanced Adapter Settings Raw Nvram DataSetting Options Default Fast!UTIL Firmware Settings. lists the default settings for the HBA Extended Firmware SettingsConnection Options Type of Connection Scan Fibre Channel Devices Fibre Disk UtilitySelect Host Adapter Regulatory Compliance Notices Class a Equipment Federal Communications Commission NoticeModifications Network and Serial CablesCanadian Notice Avis Canadien Japanese Notice Japanese Class a Notice Class a EquipmentLaser Devices Laser Safety WarningsCompliance with Cdrh Regulations Compliance with International RegulationsRegulatory Compliance Notices Electrostatic Discharge Grounding Methods Index Index Index Index