HP DL380 manual Acoustic Noise, Idle, Operating, Smart Array P400 Disk Drive, Server Interface

QuickSpecs

HP ProLiant DL380 Generation 5

Technical Specifications

	Maximum allowable altitude change rate is
	457 m/min (1500 ft/min).
Non-operating	9144 m (30,000 ft). Maximum allowable
	altitude change rate is 457 m/min (1500
	ft/min).

	Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and
		declared average bystander position A-Weighted sound pressure levels
		(LpAm) when the product is operating in a 23°C ambient environment.
		Noise emissions were measured in accordance with ISO 7779 (ECMA
		74) and declared in accordance with ISO 9296 (ECMA 109).
		Idle
		LWAd	6.1 B
		LpAm	44 dBA
		Operating
		LWAd	6.1 B
		LpAm	44 dBA
Smart Array P400	Disk Drive and	3G SAS (Serial Attached SCSI)
Controller	Enclosure Interface	1.5G SATA (Serial Advanced Technology Attachment)

SAS Connectors 2 internal (SFF8484) x4 wide port connectors

Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.

Server Interface	x8 2.5G PCIe provides 2GB/s maximum bandwidth.
SAS Speed	x8 3G SAS provides 2.4GB/s maximum bandwidth.
Cache Memory	40-bit 256MB cache (72-bit 512MB module upgrades available); ECC
	protection, battery-backed, and transportable
Logical Drives	Up to 32 logical drives
Supported
Host Memory	64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support	RAID 6 with ADG (Advanced Data Guarding) requires Battery Backed
	Write Cache Upgrade
	RAID 5 (Distributed Data Guarding)
	RAID 1+0 (Striping & Mirroring)
	RAID 0 (Striping)

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008 Page 43