HP DL380 manual Technical Specifications

Page 42

QuickSpecs

HP ProLiant DL380 Generation 5

Technical Specifications

System Unit

Dimensions (H x W x D) 3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)

 

 

(with bezel)

 

 

 

 

Weight (approximate)

Maximum

60 lb (27.22 kg)

 

 

 

(all hard drives, power

 

 

 

 

supply, and processor

 

 

 

 

installed)

 

 

 

 

Minimum

47.18 lb (20.41 kg)

 

 

 

(one hard drive, power

 

 

 

 

supply, and processor

 

 

 

 

installed)

 

 

 

Input Requirements

Rated Line Voltage

100 - 132 VAC,

 

 

(per power supply)

 

200 - 240 VAC

 

 

 

Rated Input Current

10A (at 100 VAC)

 

 

 

 

9A (at 120 VAC)

 

 

 

 

6.1A (at 200 VAC)

 

 

 

Rated Input Frequency

50 to 60 Hz

 

 

 

Rated Input Power

980W (at 100 VAC)

 

 

 

 

1035W (at 120 VAC)

 

 

 

 

1170W (at 240 VAC)

 

 

BTU Rating

Maximum

3350 BTU/hr (at 100 VAC)

 

 

 

 

3530 BTU/hr (at 120 VAC)

 

 

 

 

3990 BTU/hr (at 240 VAC)

 

 

Power Specifications

To review typical system power ratings use the Power Calculator which

 

 

 

is available via the online tool located at URL:

 

 

 

http://h30099.www3.hp.com/configurator/calc/Power%

 

 

 

20Calculator%20Catalog.xls

 

 

 

- Click on the system of interest. Example: DL380 G5

 

 

 

- Follow the instructions of the next screens.

 

 

Power Supply Output

Rated Steady-State

800 W (at 100 VAC)

 

 

Power

Power

850 W (at 120 VAC)

 

 

(per power supply)

 

1000W (qt 200-240 VAC)

 

 

 

Maximum Peak Power

800 W (at 100 VAC)

 

 

 

 

850 W (at 120 VAC)

 

 

 

 

1000W (at 200-240 VAC)

 

 

System Inlet

Operating

10° to 35°C (50° to 95°F) at sea level with an

 

 

Temperature

 

altitude derating of 1.0°C per every 305 m

 

 

 

 

(1.8°F per every 1000 ft) above sea level to a

 

 

 

 

maximum of 3050 m (10,000 ft), no direct

 

 

 

 

sustained sunlight. Maximum rate of change

 

 

 

 

is 10°C/hr (18°F/hr). The upper limit may be

 

 

 

 

limited by the type and number of options

 

 

 

 

installed.

 

 

 

 

System performance may be reduced if

 

 

 

 

operating with a fan fault or above 30°C

 

 

 

 

(86°F).

 

 

 

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of

 

 

 

 

change is 20°C/hr (36°F/hr).

 

 

Relative Humidity

Operating

10 to 90% relative humidity (Rh), 28°C

 

 

(non-condensing)

 

(82.4°F) maximum wet bulb temperature, non-

 

 

 

 

condensing.

 

 

 

Non-operating

5 to 95% relative humidity (Rh), 38.7°C

 

 

 

 

(101.7°F) maximum wet bulb temperature,

 

 

 

 

non-condensing.

 

 

Altitude

Operating

3050 m (10,000 ft). This value may be limited

 

 

 

 

by the type and number of options installed.

 

 

 

 

 

DA - 12477 Worldwide QuickSpecs — Version 32 — 1.22.2008

Page 42

Image 42
Contents Overview Front ViewRear View Processors Deployment/ServiceabilityWarranty MemoryStandard Features ProcessorCache Memory One of the following depending on Model Upgradeability Memory ProtectionStorage NumberStorage Controller One of the following depending on Model Maximum InternalInterfaces IntelligentManageability Regarding USB supportProduct ProLiant Server Management HP Systems InsightStand Alone Software Manager EssentialsQuickSpecs Core Infrastructure Server Power CordsUPS and PDU Power Industry StandardFully redundant hot plug fans ship standard N+1 Optional Hot Plug AC Redundant Power Supply800Watt, CE Mark Compliant Microsoft Windows ServerRack Kit ConfiguratorService and Support Telco Rack SupportQuickSpecs Gigabit Ethernet HPC InterconnectsHPC Interconnect InfiniBand Myrinet XPModels Country Code Key SAS Controllers Configuration Information Factory Integrated ModelsFactory Integrated Model ships with DrivesBase Memory Choose Additional Options for Factory Integration Options Integrated Lights-Out Advanced Pack HP Insight Power Manager IPMControl Integrated Lights-Out Select Pack Optimize Accelerated iSCSI PackProLiant Software Maintenance Subscription Optical Drives Memory DIMMsDiskette Drive Hard Drives Hot Plug SFF SAS 2.5 DrivesSmart Array P600 Controller Smart Array E500 ControllerSmart Array P400 Controller Smart Array P800 ControllerNC510C adapter CommunicationsNC510F adapter HPC Specific OptionsUSB Tape Drives Power CordsTape Drives SAS Tape DrivesTape Autoloaders HP StorageWorks DAT Autoloader HP D2D BackupSystem HP StorageWorks 1/8 Tape AutoloaderHP StorageWorks MSL8096 Tape Library Tape LibrariesHP StorageWorks MSL4048 Tape Library LTO-3 Ultrium 960 technologyStorageWorks Scsi HBA Cluster OptionsStorageWorks Options StorageWorks Fibre Channel HBA HP StorageWorksHP StorageWorks Modular Smart Array 500 G2 HP StorageWorks Modular Smart ArrayHP StorageWorks Modular Smart Array 1500 cs Uninterruptible Power Systems Rack USB OptionsHP Rack 5000 Series HP Rack 10000 G2 SeriesHP Rack 10000 Series Keyboards and Monitors Hardware Services On-site Service HP KVM Switch OptionsService and Support Offerings HP Care Hardware Services 6-Hour Call to Repair On-site ServiceQuickSpecs Memory Online spare memory configuration Mirrored memory configurationStorage Sata Hot Plug Drives Quantity Position Supported ControllerTape Drives, Tape Autoloaders, Tape Libraries & D2D Backup Maximum Storage Capacity with MSA50USB Tape Drives External Position Controller Part Number Supported HP StorageWorksScsi Tape Drives External SAS Tape Drives ExternalD2D Backup Systems Please consult the EBS connectivity matrix atFibre Tape Automation External Power Supply Specification DC Part number Power SpecificationsPower Supply Specification AC Part number Spare KitTechnical Specifications Operating Acoustic NoiseIdle Smart Array P400 Disk DriveSupported Maximum Volume SAS ConnectorsLogical Volumes ConnectorEnvironment-friendly End-of-life Products ManagementApproach Recycling