BM 2610028205
Functional Description and Specifications
FIG. 2
IMAGER HEAD
LED
CAMERA
MIRROR
MAGNET
IMAGER CABLE
HOOK
IMAGER CABLE CONNECTOR
Optical Cable Length: 4’ (17mm diameter) included with PS90 & PS91 3’ (9.5mm diameter) included with PS91
Assembly
ImAgER CABLE ASSEmBLy
To use the Product, the imager cable must be attached to the handheld display unit. To connect the cable, make sure the key and slot are properly aligned. Once they are aligned,
TO INSTALL AN ACCESSORy
The three included accessories, (mirror, hook and magnet) attach to the imager head in the same way. To connect, hold the imager head, slip the semicircle end of the accessory over the flats of the imager head, then rotate the accessory a 1/4 turn so the long arm of the accessory is extending out.Always direct the cord toward the rear, and away from the shear. Keep it away from sharp edges.
SLOT
FIG. 3 |
| FIG. 4 |
|
|
|
