BM 2610028205
Safety Rules for Inspection Camera
Always check the work area before beginning a job. Do not allow cable to contact electrical,
chemical, or moving hazards. Shut off circuit breakers to the entire area when probing behind walls. These preventative measures will reduce the risk of explosion, electric shock and property damage,
Do not use this device for personal inspection or medical use in any way. This is not a medical device. Serious personal
injury could result.
Do not place the inspection camera anywhere that may contain moving parts.
This reduces the risk of entanglement injuries.
Always use appropriate personal protective equipment while handling and using the inspection camera. Appropriate personal protective equipment always includes safety glasses and gloves and may include equipment such as latex or rubber gloves, face shields, goggles, protective clothing, respirators and steel toed footwear. Drains
and other areas may contain chemicals, bacteria and other substances that may be toxic, infectious, cause burns or other issues.
Practice good hygiene. Use hot, soapy water to wash hands and other body parts exposed to drain contents after handling or using the inspection camera to inspect drains and other areas that may contain chemicals or bacteria. Do not eat or smoke while operating or handling the inspection camera. This will help prevent contamination with toxic or infectious material.
Do not operate the inspection camera if operator or device is standing in water.
Operating an electrical device while in water increases the risk of electrical shock.
Do not use this device for personal inspection or medical use in any way. This is not a medical device. Serious personal injury could result.
Do not use the cable to clear clogs or move obstructions. This is not a drain cleaner.
Do not immerse the handle or the display unit in water. The imager head and the cable are water resistant when the unit is fully assembled, but the video display is not. Such measures reduce the risk of electric shock and damage.
Battery/Charger
!WARNING Before using battery charger, read all instructions
and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery.
Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual. Do not substitute any other charger. Use only Bosch approved chargers with your product. See Functional Description and Specifications.
Do not disassemble charger or operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Replace damaged cord or plugs immediately. Incorrect reassembly or damage may result in electric shock or fire.
Do not recharge battery in damp or wet environment. Do not expose charger to rain
or snow. If battery case is cracked or otherwise damaged, do not insert into charger. Battery short or fire may result.
Charge only Bosch approved rechargeable batteries. See Functional Description and Specifications. Other types of batteries may burst causing personal injury and damage.
Charge battery pack in temperatures above +32 degrees F (0 degrees C) and below +113 degrees F (45 degrees C). Store tool and battery pack in locations where temperatures will not exceed 120 degrees F (49 degrees C). This is important to prevent serious damage to the battery cells.
Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. The battery liquid is caustic and could cause chemical burns to tissues. If liquid comes in contact with
