Bosch Power Tools PS90-1A manual Operating Instructions, Product Description, Battery Release Tabs

BM 2610028205 10-12_BM 2610028205 10-12.qxp 10/23/12 2:13 PM Page 7

Operating Instructions

PRODUCT DESCRIPTION

The Product is a hand-held optical inspection device designed to provide the user with the ability to view objects in otherwise inaccessible places. The image is displayed in full color on the viewing screen.

This device is equipped with an imaging and lighting source that features LED light adjustment allowing the user to optimize the lighting conditions for the viewing situation. These features ensure a detailed and accurate visual inspection. The mirror, hook, magnet accessories can be attached to the imager head to provide application flexibility.

USINg ThE PRODUCT

To turn the unit on, hold the viewer with the LCD screen facing you. Press the ON/OFF switch to turn on the unit. To adjust the brightness of the LED light, press the Button with the (+) sign to increase the brightness and press the Button with the (-) sign to decrease the brightness.

Gently insert the imager head and cable into the environment containing the object to be viewed. The intensity of the illumination should be adjusted to give the best image on the viewing screen. In some circumstances less is best (especially if the object is highly reflective).

The unit can be connected to an external NTSC monitor using the Video-Out connector. The connector is accessed by inserting one end of a standard 3.5mm plug to RCA video cable into the product and the other end into a monitor capable of displaying a standard NTSC video signal. After use, remove the video cable from the product.

Do not use the cable or imager head to modify surroundings, clear pathways or clogged areas, or as anything other than an inspection device.

The hand-held display unit is not water resistant. The imager head and its covering are water resistant, but are not acid-proof or fireproof. Petroleum-based products will ruin the imager head’s protective plastic covering over time. Avoid submersing the imager head into corrosive, oily places.

Do not insert the imager head and cable into any space containing live electric wiring or moving parts.

Do not use this device for medical inspections. This is not a medical device and personal injury could occur.

INSERTINg AND RELEASINg

BATTERy PACK

Release battery pack from tool by pressing on both sides of the battery release tabs and pull downward (Fig. 5).

To insert battery, align battery and slide battery pack into tool until it locks into position. Do not force.

If battery release tabs are

!WARNING cracked or otherwise damaged, do not insert into tool. Battery can fall out during operation.

FIG. 5

BATTERY

RELEASE

TABS

-7-